BTS-SNIR/CCNA
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Configure initial router settings and connect a router to a LAN

Browse Source
This commit is contained in:
Le Stagiaire
2024-10-14 17:23:43 +02:00
parent f22523b0ca
commit c01bd72e71
7 changed files with 142 additions and 0 deletions
Download Patch File Download Diff File Expand all files Collapse all files

BIN
10.3.4/10.3.4-packet-tracer---connect-a-router-to-a-lan.pdf Normal file
View File

Binary file not shown.

BIN
10.3.4/10.3.4-packet-tracer---connect-a-router-to-a-lan.pka Normal file
View File

Binary file not shown.

73
10.3.4/README.md Normal file
View File

@ -0,0 +1,73 @@
# 10.3.4 - Connect a router to a LAN
## Part 1 - Step 1
### a. Which command displays the statistics for all interfaces configured on a router?
show ip interface brief
### b. Which command displays the information about the Serial 0/0/0 interface only?
show interface serial 0/0/0
### c. What is the IP address configured on R1?
The IP address is 209.165.200.225
### c. What is the bandwidth on the Serial 0/0/0 interface?
The bandwidth is 1544 kbit/s
### d. What is the IP address on R1?
There is no IP
### d. What is the MAC address of the GigabitEthernet 0/0 interface?
The MAC address is 00:0D:BD:6C:7D:01
### d. What is the bandwidth (BW) of the GigabitEthernet 0/0 interface?
The bandwidth is 1000000 kbit/s
## Part 1 - Step 2
### a. Which command displays a brief summary of the current interfaces, interface status, and the IP addresses assigned to them?
show ip interface brief
### b. How many serial interfaces are there on R1 and R2?
There are 2 serial interfaces on R1 and R2
### b. How many Ethernet interfaces are there on R1 and R2?
There are 6 Ethernet interfaces on R1 and 2 Ethernet interfaces on R2
### b. Are all the Ethernet interfaces on R1 the same? If no, explain the difference(s).
No, there are Fast Ethernet which bandwidth are limited to 100mbit/s and Gigabit Ethernet which bandwidth are limited to 1gbit/s
## Part 1 - Step 3
### a. What command displays the contents of the routing table?
show ip route
### b. How many connected routes are there (uses the C code)?
There is 1 connected route
### b. Which route is listed?
The route listed is the one connected to Serial 0/0/0
### b. How does a router handle a packet destined for a network that is not listed in the routing table?
It drops it
## Part 2 - Step 3
### Save the configuration files on both routers to NVRAM. What command did you use?
I used the write command