Add README.md files for sections 1.3.6, 1.6.1, and 1.4.7

1.1.7/README.md

@@ -0,0 +1,87 @@
+# 1.1.7 - Lab - Basic Switch Configuration
+
+## Part 1 - Step 1
+
+### b. Why must you use a console connection to initially configure the switch? Why is it not possible to connect to the switch via Telnet or SSH?
+
+Because telnet and ssh are not configured
+
+## Part 1 - Step 2
+
+### b. How many FastEthernet interfaces does a 3750 switch have?
+
+The switch have 24 FastEthernet ports
+
+### b. How many GigabitEthernet interfaces does a 3750 switch have?
+
+The switch have 2 GigabitEthernet ports
+
+### b. What is the range of values shown for the VTY lines?
+
+The range for VTY lines is 0 - 15
+
+### c. Why does this message appear?
+
+Because no startup configuration is present in the NVRAM
+
+### d. Is there an IP address assigned to VLAN 1?
+
+No
+
+### d. What is the MAC address of this SVI?
+
+001D.464B.C3C0
+
+### d. Is this interface up?
+
+The line status is up but the protocol is down
+
+### g. What is the Cisco IOS version version information of the switch?
+
+Cisco C3750 SOftware Version 12.2(55)SE12
+
+### g. What is the system image filename?
+
+c3750-ipbasek9-mz.122-55.SE12.bin
+
+### g. What is the base MAC address of this switch?
+
+00:1D::46:4B:C3:80
+
+### h. Is the interface up or down?
+
+The interface is up
+
+### h. What event would make an interface go up?
+
+To plug an ethernet cable in the port of the interface
+
+### h. What is the MAC address of this interface?
+
+001D.464B.C388
+
+### h. What is the speed and duplex setting of the interface?
+
+The interface is in full-duplex 100mbps
+
+### i. What is the default name of the VLAN 1?
+
+default
+
+### i. Which port are in VLAN 1?
+
+All the switch ports
+
+### i. What type of VLAN is the default VLAN?
+
+The type of default VLAN is enet
+
+### j. What is the filename o fthe Cisco IOS image?
+
+c3750-ipbasek9-mz.122-55.SE12.bin
+
+## Part 2 - Step 1
+
+### g. Why is the login command required?
+
+To allow connections on line