Add README.md files for sections 1.3.6, 1.6.1, and 1.4.7
This commit is contained in:
Binary file not shown.
Binary file not shown.
99
1.6.2/README.md
Normal file
99
1.6.2/README.md
Normal file
@ -0,0 +1,99 @@
|
||||
# 1.6.2 Configure basic router settings - Physical Mode
|
||||
|
||||
## Part 2 - Step 2
|
||||
|
||||
### p. What would be the result of reloading the router prior to completing the copy running-config startup-config command?
|
||||
|
||||
The router will take the default config
|
||||
|
||||
## Part 2 - Step 3
|
||||
|
||||
### a. Were the pings successful?
|
||||
|
||||
Yes
|
||||
|
||||
### b. Was the remote access successful?
|
||||
|
||||
Yes
|
||||
|
||||
### c. Was the remote access successful?
|
||||
|
||||
Yes
|
||||
|
||||
### c. Why is the Telnet protocol considered to be a security risk?
|
||||
|
||||
Because the data are not sent encrypted through the network
|
||||
|
||||
## Part 3 - Step 2
|
||||
|
||||
### a. What is the name of the IOS image that the router is running?
|
||||
|
||||
Version 03.16.05.S - Extended Support Release
|
||||
|
||||
### a. How much non-volatile random-access memory (NVRAM) does the router have?
|
||||
|
||||
32768K bytes
|
||||
|
||||
### a. How much Flash memory does the router have?
|
||||
|
||||
3223551K bytes
|
||||
|
||||
### b. What would be the boot process for the router on the next reload if the configuration register was 0x2142?
|
||||
|
||||
The configuration will be changed
|
||||
|
||||
## Part 3 - Step 3
|
||||
|
||||
### a. How are passwords presented in the output?
|
||||
|
||||
The password are encrypted
|
||||
|
||||
### b. What is the result of using this command?
|
||||
|
||||
This will show the VTY lines config
|
||||
|
||||
## Part 3 - Step 4
|
||||
|
||||
### a. What code is used in the routing table to indicate a directly connected network?
|
||||
|
||||
The code is C
|
||||
|
||||
### a. How many route entries are coded with a C code in the routing table?
|
||||
|
||||
There are 3
|
||||
|
||||
## Part 3 - Step 5
|
||||
|
||||
### a. What command changed the status of the Gigabit Ethernet ports from administratively down to up?
|
||||
|
||||
The command no shutdown
|
||||
|
||||
### b. What is the meaning of the [up/up] part of the output?
|
||||
|
||||
This is for link and protocol
|
||||
|
||||
### c. What is the IPv6 address assigned to Server?
|
||||
|
||||
The IPv6 address is 2001:DB8:ACAD:0:207:ECFF:FEA5:6286
|
||||
|
||||
### c. What is the default gateway assigned to Server?
|
||||
|
||||
The default gateway is FE80::1
|
||||
|
||||
### c. From PC-B, issue a ping to the R1 default gateway link local address. Was it successful?
|
||||
|
||||
Yes
|
||||
|
||||
### c. From Server, issue a ping to the R1 IPv6 unicast address 2001:db8:acad::1. Was it successful?
|
||||
|
||||
Yes
|
||||
|
||||
## Reflection Questions
|
||||
|
||||
### 1. In researching a network connectivity issue, a technician suspects that an interface was not enabled. What show command could the technician use to troubleshoot this issue?
|
||||
|
||||
show interface brief
|
||||
|
||||
### 2. In researching a network connectivity issue, a technician suspects that an interface was assigned an incorrect subnet mask. What show command could the technician use to troubleshoot this issue?
|
||||
|
||||
show ip interface brief
|
Reference in New Issue
Block a user