2.4 KiB
2.4 KiB
1.6.2 Configure basic router settings - Physical Mode
Part 2 - Step 2
p. What would be the result of reloading the router prior to completing the copy running-config startup-config command?
The router will take the default config
Part 2 - Step 3
a. Were the pings successful?
Yes
b. Was the remote access successful?
Yes
c. Was the remote access successful?
Yes
c. Why is the Telnet protocol considered to be a security risk?
Because the data are not sent encrypted through the network
Part 3 - Step 2
a. What is the name of the IOS image that the router is running?
Version 03.16.05.S - Extended Support Release
a. How much non-volatile random-access memory (NVRAM) does the router have?
32768K bytes
a. How much Flash memory does the router have?
3223551K bytes
b. What would be the boot process for the router on the next reload if the configuration register was 0x2142?
The configuration will be changed
Part 3 - Step 3
a. How are passwords presented in the output?
The password are encrypted
b. What is the result of using this command?
This will show the VTY lines config
Part 3 - Step 4
a. What code is used in the routing table to indicate a directly connected network?
The code is C
a. How many route entries are coded with a C code in the routing table?
There are 3
Part 3 - Step 5
a. What command changed the status of the Gigabit Ethernet ports from administratively down to up?
The command no shutdown
b. What is the meaning of the [up/up] part of the output?
This is for link and protocol
c. What is the IPv6 address assigned to Server?
The IPv6 address is 2001:DB8:ACAD:0:207:ECFF:FEA5:6286
c. What is the default gateway assigned to Server?
The default gateway is FE80::1
c. From PC-B, issue a ping to the R1 default gateway link local address. Was it successful?
Yes
c. From Server, issue a ping to the R1 IPv6 unicast address 2001:db8:acad::1. Was it successful?
Yes
Reflection Questions
1. In researching a network connectivity issue, a technician suspects that an interface was not enabled. What show command could the technician use to troubleshoot this issue?
show interface brief
2. In researching a network connectivity issue, a technician suspects that an interface was assigned an incorrect subnet mask. What show command could the technician use to troubleshoot this issue?
show ip interface brief